Volkswagen Campmobile 1973, Руководство пользователя

Страница: 22 / 92

The front passenger seat can be adjusted
to two different positions. Lift the seat
cushion at the front edge and move the
seat into the second notch. When putting the seat back in again, hold
the seat with the seat cushion tilted to-
ward the backrest, slide the hook on the
rear side of the backrest into the bracket
on the partition. Insert the seat cushion in
the desired notch, and fold the seat
cushion down. Always check to be sure
the backrest is securely attached to the
partition.
Then unscrew the nuts and take off the
mounting supports. Remove seats. Take
out bolts by turning them.
Removing and installing seats in the rear
passenger compartment
All seats in the rear passenger compart-
ment can be taken out. First remove the
sides and front trimming from the seat
frames.
When reinstalling the seats use all bolts,
mounting supports, and nuts. Be sure to
tighten the nuts firmly.
In the 9-seater version, the backrest of the
first seat in the middle row can be tilted
forward and out of the way for easy
access to the rear bench. To disengage
the lock of the backrest, pull up the lever
on the side of the backrest.
Removing and installing the front
passenger seat
Passenger compartment
Lift it at the front edge first; then remove.
Keep the backrest hooked into the
bracket on the partition when adjusting
the seat position.
20