48
!
Emergency brake display
All model variants of the T5 2010 now feature the new "emergency brake display" function.
The ABS control unit J104 detects an emergency braking situation based on the stored threshold values for
deceleration and/or the ABS intervention time. It sets an emergency braking threshold if the speed is still faster than
60 km/h at this time. The onboard supply control unit controls the function of the emergency brake display in
response.
The emergency brake display is given in two stages.
●
Emergency braking flash
- When the vehicle is braked in a dangerous situation, the brake lights flash with high
frequency as a warning to the traffic behind
●
Emergency warning flash
- If the speed drops below 10 km/h in this emergency braking situation then the
brake lights stop flashing and reverts to a steady light for as long as the brake pedal is still being pressed.
The hazard warning lights are switched on.
The hazard warning lights are switched off automatically when the vehicle accelerates again and its speed
exceeds 10 km/h
The hazard warning lights can also be switched off manually using the button on the dash panel
Electrics
S453_096
S453_098
Emergency braking flash
Hazard warning
lights flashing
Brake light
flashing
Emergency warning flash
10 km/h