Fig. 130
In the center console: Button to switch the Park Distance Control system on or off.
¤
Please first read and note the introductory information and heed the WARNINGS
The Park Distance Control System sensors are in the front and rear bumpers,
Exterior views
.
Switching the Park Distance Control (PDC) system on and off
In order to
Operation
Manually activate PDC:
Press the
button
⇒
fig. 130
once
when the ignition is switched on.
Manually deactivate PDC:
Push the
button
again
when the ignition is switched on.
Manually deactivate the
display (sound stays active):
Press a function selection button on the radio or the navigation
system
⇒
booklet
Radio
or
⇒
booklet
Navigation system
.
OR:
Tap the function key
E
on the display.
Automatically activate PDC:
Shift into Reverse
(R)
.
Automatically deactivate
PDC:
Drive forward faster than about 5-10 mph (10-15 km/h).
Switch to the rearview
camera display (if equipped):
Shift into Reverse
(R)
.
OR:
Tap the function key
Z
or
RVC
on the display.
The indicator light in the button
comes on and stays on as long as the feature is active.
A chime sounds to tell you that the system is on. If the chime does
not
sound, PDC is not working.
Have the system inspected by an authorized Volkswagen dealer or an authorized Volkswagen Service
Facility.
Special considerations when using Park Distance Control
x
In some cases, the Park Distance Control interprets water and ice on the sensors as an obstacle.
x
If the distance remains the same, the warning tone volume decreases after a few seconds. If a
continuous tone sounds, its volume remains the same.
x
If the vehicle moves away from the obstacle, the beeping sound stops automatically. The beep
turns on again automatically if the vehicle approaches the obstacle again.
x
For vehicles with automatic transmissions, there is no beeping when the transmission is in Park
(P)
.
x
The volume of the audible signals can be adjusted by an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility.
Muting the Park Distance Control volume
You can mute the PDC beeping signals by tapping the
+
function key on the Radio or Navigation
system screen (if applicable). Tap the function key again to reactivate the acoustic signals.