Type of
notification
Symbol
color
Explanation
Priority 2 warning
message
Yellow
Symbol flashing or continuously lit – sometimes with acoustic warn-
ings.
Malfunctions or low operating fluid levels may cause vehicle dam-
age and vehicle breakdown
⇒
.
Check malfunction as soon as possible. Contact an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility for
assistance if necessary.
Information text
–
Information about various vehicle situations.
Odometer displays
The
odometer
indicates the total distance driven by the vehicle.
The
trip odometer
(
Trip
) shows the distance driven since the last time the trip odometer was reset.
The last digit indicates 1/10 mile (100 meters).
Outside temperature display
At outside temperatures below about +39 °F (+4 °C), a “snowflake symbol” (icy road warning) appears
in the display. The symbol flashes at first, then stays on until the outside temperature rises above
+43 °F (+6 °C)
⇒
.
When the vehicle is not moving or when you are driving at very low speeds, the temperature displayed
may be slightly higher than the actual outside temperature.
The measurement range is from -40 °F (-40 °C) to +122 °F (+50 °C).
Compass display (if applicable)
On vehicles equipped with compass display, the current compass direction is indicated in the instru-
ment cluster display when the ignition and navigation system are switched on.
Selector lever positions
The selector lever position is shown both on the side of the selector lever and in the instrument cluster
display. The respective gear may also be shown in the instrument cluster display in Drive
D
and Sport
Drive
S
, as well as in Tiptronic
®
mode.
Gear recommendation
When the vehicle is moving, a fuel economy gear recommendation may appear in the instrument
cluster display,
Shifting
.
Alternative speed display (mph or km/h)
The alternative speed display shows the current vehicle speed in units
other than
the units shown on
the vehicle’s speedometer. For example, if the speedometer shows mph, the alternative speed display
shows a digital readout of the current vehicle speed in km/h. This feature can be especially helpful
when driving in countries where speed limit signs are posted in units other than those shown on the
vehicle’s speedometer.
x
Start the engine.
x
Press the
®
button 3 times. The odometer display in the instrument cluster display flashes.
x
Press the
E
3%4
button once. Instead of the odometer reading, “mph” or “km/h” will be shown briefly.
x
This activates the alternative speed display. To deactivate, follow the same procedure.