31
14.
SAFE USAGE
Please, use the SmartCrystal™ Pro Booster in the specified voltage range
(240V) and only with the original power supply so as to preserve the maximum
lifetime of the product.
Please use and store your SmartCrystal™ Pro Booster in the temperatures
stated, see "Specifications".
The SmartCrystal™ Pro Booster should not be used with projectors of over
32,000 lumens, please see section "Specifications".
The SmartCrystal™ Pro Booster should not be placed closer than 80mm from
the projector lens, please see section "Installation".
15.
MAINTENANCE OF YOUR POLARIZATION MODULATOR
There are no parts accessible by the user inside of the SmartCrystal™ Pro Booster. Be
careful not to apply force to the polarizing window. Try to avoid excessive shock and
vibration.
Use a non-abrasive clean-cloth or wipe to clean the 3D system and particularly the
polarization window to avoid scratches.
Always carry the polarization modulator in a rigid case to prevent scratches on the
window and also to avoid breaking the base of the product.
16.
WARRANTIES AND COMPLIANCE
The Volfoni Group reserves the right to make changes in the hardware, packaging or
other documentation without prior written notice. The SmartCrystal™ Pro Booster is a
trademark owned by the Volfoni Group. All trademarks are the property of their
respective companies.
The SmartCrystal™ Pro Booster is warranted. Please refer to your order form to be
aware of the warrantee terms.
The system should be returned in its original box with original proof of purchase.
Volfoni does not warrant uninterrupted or error-free operation of the product.
17.
REGULATORY COMPLIANCE STATEMENTS
FCC Notice Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
