5
EXMITTER EX6 Digital Radio System
Install the receiver in your vehicle using double-sided Velcro. Velcro
will hold the receiver in place and help isolate it from vibrations.
Mount the antenna up and away from the vehicle in an antenna tube.
The higher up the antenna is, the better signal it will receive.
CAUTION:
Do not cut the antenna.
Install Your Receiver
RECEIVER
ELECTRICAL INSTALLATION
BATTERY
SERVO
ELECTRONIC
SPEED CONTROL
STEERING SERVO
GAS INSTALLATION
THROTTLE SERVO
RECEIVER
BEC BATTERY
Binding is the process of programming the receiver to recognize the
GUID (Globally Unique Identifier) code of a single specific transmitter.
When a receiver is bound to a transmitter, the receiver will only
respond to that specific transmitter. If you need to rebind for any
reason, please follow these steps:
1. With the transmitter switched ON
2. Power on the receiver,then press the bind button in 3 seconds.
3. Loose the bind button and wait for about 5 seconds.
4. The receiver LED will keep flashing, means it is binding.
5. After the receiver LED
stop flashing, it means the binding is done.
Receiver Connection & Binding
Bind Button
Antenna
Channels Instruction