Document No. : UserManual_CII_1
6.11. Power over Ethernet
48V up to a maximum of 20W is available at the base Ethernet connector for powering
control panels.
6.12. HDMI
The HD-SDI input video channel from the head is output on the HDMI connector at
the base .
6.13. Sync
This feature allows gen-locking of cameras. A sync signal connected to the sync input
on the base will appear at the sync output on the Camlinx II head for connection to the
camera. Both bi-level and tri-level (HD) syncs are supported.
6.14. Tally
Camlinx II incorporates a bidirectional Tally system used to provide an on-air indication
at either the head or the base. Connections to the Tally system appear on the 26 way
D-type connectors present on the head and base units. The head has a dedicated Tally
LED indication on the top of the unit which incorporates a push-button switch so it can
be manually disabled.
In addition, there is an 'optical Tallly' light output on the head which will be illuminated.
A 'light guide' (
OT-CAMLINXII
) can be connected to this output which can be mounted in
the camera eyepiece (or elsewhere) so the operator can always see the the Tally
indication.
Passing a current between IN+ and IN- closes the connections between Common1 /
On1 and Common2 / On2 which can be used to drive indications.
age 15 of 30
