Document No. : UserManual_CII_1
4. Quick start guide
1. Make system connections according to chosen system configuration. Ensure serial
and tally cables are connected to the system.
2. Turn on mains power to the base. Ensure power is present at the head and the
base. Note that the head powers up several seconds later than the base to reduce
power inrush loading on initial power on.
3. Check the power level indicator on the base, ensure the system is not overloaded.
4. Check fibre levels using the screenkeys display at head or base.
5. Set camera number using the menus on the base.
6. Set the serial communications standard (RS232 by default). If a remote control
panel is used, check its operation.
7. Set the head programme audio input levels - Line / Mic / Ph+ (Line by default).
8. Set the head headphone microphone input level - line/mic/silent (mic by default).
Adjust the headphone volume level.
5. System should be operational.
age 11 of 30
