Document No. : UserManual_CII_1
3. Camlinx II Configurations
The standard Camlinx 2 system is designed to use 9 µm single mode fibre and will not
work with multi-mode cable. If an existing installation has 9um fibre, then using this
with Camlinx II should not be a problem as long as cable lengths are not exceeded
(<300M for hybrid cable) and fibre connections are good.
The Camlinx 2 requires a direct optical connection between base and head. The signal
will not pass through fibre optic switching equipment such as Ethernet hubs, SMPTE
video switches, etc.
The minimum fibre length for the Camlinx 2 is 5km however much greater distances are
possible . Please contact Volamp Ltd if longer distances are required.
age 10 of 30
