Vokkero ARF7578, Руководство пользователя

Страница: 10 / 25

10
1. Description
The ARF7578 “3 slot battery charger” is used to charge and recharge the Vokkero communication system batteries.
Each charger can simultaneously charge up to 3 batteries, which come up in two different capacity : 1130 mAh &
2260 mAh.
Note 1 : the connection of the ARF7578 “3 slot battery charger” on an IT network is only possible in Norway.
Note 2
: Depending of the destination of use, the ARF7578 “3 slot battery charger” is delivered with an European
or North-American power supply cable. For any other country (European or other) requiring a specific power supply
cable, please use one equipped with a plug conform to the local standards.
2. Technical Specifications
AC/DC converter unit electrical supply 100- 240 V ~ 1.5 A- 50 to 60 Hz
Operating temperature 5°C to 45 °C (41°F to 113°F)
Charge duration • 5 hours (batt. 2260 mAh)
• 2.5 hours (batt. 1130 mAh)
Dimensions L: 143mm * H: 39 mm * W: 75 mm
Battery lifetime > 500 cycles
3. Plug in the charger
• Connect the power supply unit to the socket located on the left side of the charger.
• Connect the power supply unit to the main.
• When plugged in, the 3 LEDs (at the front of the charger) will first turn orange, then they will turn off one after the
other, and finally simultaneously flash green.
• The charger is ready to be used.
4. Install the batteries
• Place the batteries on the charger (golden contact facing down).
• When the battery has been detected, the corresponding LED turns red.
• If the corresponding LED doesn’t light, check that the battery has been correctly positioned.