Supplied By www.heating spares.co Tel. 0161 620 6677
8
5.2.3
SETTING THE VOKERA MECHANICAL CLOCK
The programmer is supplied with a built-in default
programme that can be stored/used for conven-
ience.
To store the default programme, simply press and
hold both the + and - buttons for 3-seconds.
Day 1
HTG
HW
ON1
6:30
6:30
OFF1
8:30
8:30
ON2
16:30
16:30
OFF2
22:30
22:30
Day 2
HTG
HW
ON1
6:30
6:30
OFF1
8:30
8:30
ON2
16:30
16:30
OFF2
22:30
22:30
Day 3
HTG
HW
ON1
6:30
6:30
OFF1
8:30
8:30
ON2
16:30
16:30
OFF2
22:30
22:30
Day 4
HTG
HW
ON1
6:30
6:30
OFF1
8:30
8:30
ON2
16:30
16:30
OFF2
22:30
22:30
Day 5
HTG
HW
ON1
6:30
6:30
OFF1
8:30
8:30
ON2
16:30
16:30
OFF2
22:30
22:30
Day 6
HTG
HW
ON1
6:30
6:30
OFF1
9:00
9:00
ON2
16:00
16:00
OFF2
22:30
22:30
Day 7
HTG
HW
ON1
6:30
6:30
OFF1
9:00
9:00
ON2
16:00
16:00
OFF2
22:30
22:30
DEFAULT PROGRAMME
5.2.4
PROGRAMMING PROCEDURE
For each channel (C1 & C2) there are 2 timed ON
settings, and 2 timed OFF settings for each day of
the week. The programming sequence for each
channel is as follows:
●
programme the C1 channel (heating) 1
st
ON then
1
st
OFF, then 2
nd
ON and then 2
nd
OFF for each
day of the week starting from day 1 (Monday).
The same procedure will be carried out for the
remaining subsequent days (day 2 till day 7)
●
after the final OFF (2
nd
OFF, day-7) setting has
been programmed on C1, the display will move
to show the programming icons on channel C2
(hot water). C2 can then be programmed in the
same sequence as detailed for C1.
To adjust or re-programme the default programme,
please proceed as follows:
●
Press and hold the
P button for 3-seconds, the
display will show
PRO for 1-second to signal that
the programmer is now ready to be re-pro-
grammed/adjusted (programming mode).
●
The first day of the week will blink on the display,
followed by the HTG ‘ON’ icon, then followed by
the stored value (time).
●
To adjust the current – stored – value, press
either the + or - button to increase or decrease
the displayed value to the desired setting.
●
●
●
●
●
Press
P to confirm and store the new value.
●
●
●
●
●
Use the same (above) sequence for the subse-
quent ON/OFF settings and subsequent days.
●
●
●
●
●
Once the programming of C1 (heating) channel
has been completed, the programmer sequence
will automatically move on to C2 (hot water).
NOTE
If no buttons are pressed within a 10-second pe-
riod, the programmer will exit the programming
mode and revert to the normal display.
To review the current stored programmes, press
and release the
P button whereby the display will
scroll through the current stored programmes. To
exit and return to the current operating mode, press
and release the
P button.
5.2.5
OPERATING MODES
Each channel (C1 & C2) has 3-different modes of
operation:
●
Automatic: using the stored ON/OFF settings
●
ON: 24-hours each day
●
OFF: 24-hours each day.
To change the operating mode, press either C1 or
C2 (depending on your preference) and select the
desired mode of operation.
Manual operation - OFF
1 2 3 4 5 6 7
MAN
AUTO
MAN
AUTO
12:34
OFF
ON
OFF
ON
Manual operation - ON
1 2 3 4 5 6 7
MAN
AUTO
MAN
AUTO
12:34
OFF
ON
OFF
ON
Automatic (programmed settings)
1 2 3 4 5 6 7
MAN
AUTO
MAN
AUTO
17:34
OFF
ON
OFF
ON
1 2 3 4 5 6 7
MAN
AUTO
MAN
AUTO
15:22
OFF
ON
OFF
ON