Vokera Compact 29kW Quick Help Guide
Move 2 Green Ltd, Units 7&8, Sands Industrial Estate, Swalwell, Newcastle upon Tyne, NE16 3DJ
Tel 0191 496 1888 Fax: 0191 488 8812 [email protected] www.move2green.org.uk
Page 3 of 3
Rev 00 -‐ 08/13
Correcting Heating System Pressure
(Ref Fig 1d.)
For normal operation your heating system pressure should be between 1.0 and 1.5 bar, see Fig 5a. In the event
the system has locked out, your system pressure will may have fallen below this pressure. To correct this
please see the following instructions.
Fig 5
Fig 6
Fig 7
Fig 8 Fig 9
For copies of operation and installation instructions please visit www.move2green.org.uk/downloads
Filling loop.
(Silver hose located under boiler)
When the boiler loses pressure you will need to locate the two taps from the filling loop.
If the either of the taps are horizontal (not running the same way as the pipework) then the taps are closed. In
order to change the pressure you must open them by turning them to run with the pipe (as shown below).
Fig 5a