Voith 91868550, Инструкция по эксплуатации и руководство пользователя

Страница: 8 / 27

Instruction and Operating Manual
Overspeed Protector CTO-B45202
2019 / 02
J.M. Voith SE & Co. KG │ Division Digital Ventures
Page: 8 / 25
918 3626018864 en D – 74564 Crailsheim Version: 2.1
Staff qualification

Only trained and instructed personnel are allowed to work on the overspeed protector.
These personnel must be sufficiently trained, instructed and authorized to properly
mount, operate and maintain the overspeed protector in accordance with the safety
standards.

Installation, commissioning and operation have to be performed by a certified electrician
with experience and knowledge in the field of explosion protection.
Constructional modifications

Mounting work and structural modifications are not permitted.

The screw fitting of the cable entry on the control magnet (VRM) is secured against
distortion. Do not distort or slacken the screw fitting.
2.4 Warranty
The terms and conditions mentioned in the General Terms and conditions for Sale of
Industrial Engineering of
J.M. Voith SE & Co. KG │ Division Digital Ventures, Crailsheim
shall apply. Warranty claims are excluded if these are due to one or several of the following
causes:
•
Improper transportation, storage, installation, connection, commissioning, operation,
maintenance and repair of products of the overspeed protector.
•
Failure to observe the operational and product safety regulations included in this
instruction manual.
•
Use of spare parts not approved by J.M. Voith SE & Co
. KG │ Division Digital Ventures,
Crailsheim.

During the warranty period, repair work on the overspeed protector may only be
performed with the approval of
J.M. Voith SE & Co. KG │ Division Digital Ventures,
Crailsheim.