Instruction and Operating Manual
Overspeed Protector CTO-B45202
2019 / 02
J.M. Voith SE & Co. KG │ Division Digital Ventures
Page: 12 / 25
918 3626018864 en
D – 74564 Crailsheim
Version: 2.1
4
Packing, Storage, and Transportation
Packing
The overspeed protector is supplied in a special packaging. All hydraulic connections are
sealed with protective plugs.
Storage and preservation
The outer surfaces of the overspeed protector are electro-plated. On delivery, the inner
parts of the overspeed protector, which are not surface-coated, are moistened with
preservation oil.
Within Europe, this preservation is sufficient as corrosion protection for about 8 months,
provided the overspeed protector is stored in a dry location.
If it is intended to store the overspeed protector for a longer period of time, special
precautions have to be taken. Coordinate such precautions for each individual case with
J.M. Voith SE & Co. KG │ Division Digital Ventures, Crailsheim.
The ambient conditions for storage must be within the limits indicated in Chapter 1.
Transportation
It is not allowed to transport the overspeed protector in an explosive atmosphere! This
also applies to the transportation of spare parts!
Improper transportation or lifting of the overspeed protector may cause damage to
property and personal injuries.
Observe, in particular, that constraining forces do not act on the cable entry of the
control magnet (VRM) and that the connecting line is not damaged.
For transportation purposes, it is not allowed to keep the overspeed protector
connected to the connecting line.
Содержание 91868550
Страница 26: ......