Voith 91868550, Инструкция по эксплуатации и руководство пользователя

Страница: 23 / 27

Instruction and Operating Manual
Overspeed Protector CTO-B45202
2019 / 02
J.M. Voith SE & Co. KG │ Division Digital Ventures
Page: 23 / 25
918 3626018864 en D – 74564 Crailsheim Version: 2.1
8 Decommissioning
Disposal
For overspeed protector disposal, please observe the local applicable provisions on
protection of the environment. The servomotor essentially contains steel, copper, synthetic
materials, electronic components, and residual oil.

If the overspeed protector is switched off for repair or inspection purposes, or for a
system shutdown, switch off the oil supply system and release all pressure
accumulators, if effective.

Wear protective glasses when disassembling the hydraulic connection on the
overspeed protector.

Disconnect the 24 V DC power supply and remove the lines. Remove the piping. This
may result in larger oil quantities leaking out. Collect the oil in a suitable container and
dispose of it properly. Close all openings. Now the overspeed protector can be cleaned
and packed.