U
SER
M
ANUAL
©
VOI
SPEED
L
TD
.
10
-
Enter 03 followed by the mask net.
-
Enter 04 followed by the gateway’s address.
-
Enter 05 followed by the primary DNS server’s address.
Note:
IP addresses must be entered using 12 digits without dots. Example: to enter
192.168.0.15 you will need to enter 192168000015.
Once the IP address has been configured you can then enter the adapter’s web interface.
Note:
in order to simplify the configuration process we strongly recommend configuring
the web interface using a static IP address.
5.4 -
Emergency Line
In addition to accessing the vocal menu’, the FXS port can be used to connect a
traditional analogue phone to be used as an emergency backup. The emergency phone
can be used in case of electric outage that would prevent the PBX from operating
correctly.
6 -
Manual Setting
It is possible to setup the V-6017 adapter using an analogue telephone connected to the
FXS port. You will need to enter ‘***’ at the phone in order to access the configuration
menu followed by the desired option.
OPTION
DESCRIPTION
#
Main Menu’
Here you can access all available options. Once entered any sub-menu’
you can go back to the main menu’ by pressing the ‘#‘ key.
*
List of available options
By entering the start key, the system will list all available options for that
menu’.
01
Network address static/dynamic
By entering 01 the adapter will describe how the IP address is being
acquired: in static mode (entered during the setup phase) or in dynamic
mode (through a DHCP server). In order to change mode you need to
enter 9.
Note: you will need to restart the adapter once any changes have been
made.
02
IP address
With this command the system will provide the IP address assigned to the
adapter. This address can be easily changed by entering a new one.
