Void Digidrive V2 Скачать руководство пользователя страница 33

Digidrive V2 

User Manual 

33  

 

12.0…………………………………………………………………….Warranty 
 

LIMITED WARRANTY 

 

THE WARRANTY 

For a period of three (3) years from the date of delivery to the original purchaser (as shown on the 

original invoice or sales receipt), Void Acoustics (hereinafter "Void") warrants to the ORIGINAL OWNER 

of each new Digidrive V2 (provided it was purchased at an Authorised Void Dealer) that it is free of 

defects in materials and workmanship and that each product will meet or exceed all factory published 

specifications for each respective model. Void agrees to repair or replace (at its discretion) all defective 

parts at no charge for labour or materials; subject to following provisions: 

 

WARRANTY VIOLATIONS 

Void shall take no responsibility for repair or replacement as specified under this warranty, if the 

damaged product has been subject to misuse, accident, neglect or failure to comply with normal 

maintenance procedures; or if the serial number has been defaced, altered or removed. Nor will Void 

accept responsibility for, or resulting from, improper alterations or unauthorised parts or repairs. This 

warranty does not cover any damage to speakers or any other consequential damage resulting from 

breach of any written or implied warranty. 

 

VOID WARRANTY PROVISIONS 

Void will remedy any defect, regardless of the reason for failure (except as excluded) by repair, or 

replacement. Void will remedy the defect and ship the product within a reasonable time after receipt of 

the defective product at an Void Authorised Service Centre. 

 

TO OBTAIN WARRANTY SERVICE 

In the event that a Void product requires service, the Owner must contact Void or an Authorised Void 

Service Centre to receive an R.A.N. (Return Authorisation Number) and instructions on how to return the 

product to the Void Authorised Service Centre, or to the factory. Void (or its Authorised Service Centre) 

will initiate corrective repairs upon receipt of the returned product. Please save the original carton and 

all the packing materials in case shipping is required. All products being returned to the factory or 

service centre for repairs must be shipped prepaid. 

 

If the repairs made by Void or the Void Authorised Service Centre are not satisfactory, the Owner is 

instructed to give written notice to Void. If the defect or malfunction remains after a reasonable amount 

of attempts by Void to remedy the defect or malfunction, the Owner shall then have the option to elect 

either a refund or replacement of said Void product free of charge. The refund shall be an amount equal 

to but not greater than the actual purchase price, not including any taxes, interest, insurance, closing 

costs and other finance charges (minus reasonable depreciation on the product). If a refund is 

necessary, the Owner must make the defective or malfunctioning product available to Void free and clear 

of all liens or other restrictions. 

 

MODIFICATIONS OF EQUIPMENT 

Void reserves the right to modify or change equipment (in whole or part) at any time prior to delivery 

thereof, in order to include therein electrical or mechanical improvements deemed appropriate by Void, 

but without incurring any liability to modify or change any equipment previously delivered, or to supply 

new equipment in accordance with any earlier specifications. 

 

DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES 

YOU, THE OWNER, ARE NOT ENTITLED TO RECOVER FROM VOID ANY INCIDENTAL DAMAGES 

RESULTING FROM ANY DEFECT IN THE VOID PRODUCT. THIS INCLUDES ANY DAMAGE TO ANOTHER 

PRODUCT OR PRODUCTS RESULTING FROM SUCH A DEFECT. 

 

WARRANTY ALTERATIONS 

No person has the authority to enlarge, amend, or modify this Warranty. This Warranty is not extended by 

the length of time which the Owner is deprived of the use of product. Repairs and replacement parts 

provided pursuant to the Warranty shall carry only the non-expired portion of the Warranty. 

 

THIS STATEMENT OF WARRANTY SUPERSEDES ALL OTHERS CONTAINED IN THIS MANUAL 

Содержание Digidrive V2





































Отзывы: