Void Digidrive V2, Руководство пользователя

Страница: 22 / 36

Digidrive V2
User Manual
22
7.6.3.…………………………………………………….Input A-D
Each input tab contains EQ, Limiter, Gain and LPF/HPF
controls. Every individual EQ in the 10-band EQ allows
frequency control from 20Hz – 20kHz, gain +/-12dB and
Q from 0.2 to 25.0 for each channel, which is visually
represented in the graph above. Each EQ can be
manipulated left-clicking on the respective square in the
EQ graph, and dragging with a mouse. The Q can be
changed by right-clicking the respective square and
dragging from left-right.
Below the EQ matrix is the HPF/LPF controls. The
number box sets the frequency (20Hz to 20kHz), and the
drop down menu chooses the filter type (Butterworth,
Bessel, Linkwitz-Riley, 6dB/Octave to 24dB/Octave).
The gain fader on the right-hand side of the window
coincides with the fader in the Main tab’s mixing matrix,
as well as the mute button.
The delay control offers a delay from 0ms to 2000ms, but
the units can be changed to feet, inches, mil, meters,
millimetres and seconds.
To the right of the delay control, there is a limiter, to
ensure that clipping does not occur when the signal
goes above the set threshold (between -48.00dBu and
+24.00dBu). The release can be set between 1ms and
100ms.
The limiter on the output is there to stop and unwanted
clipping from high peaks in the audio
The mute button is linked to the mute button on the main
tab, and will cut the channel. The invert button is
linked to the phase invert on the X-over tab and will
invert the polarity of the signal. When the button is
blue, phase is inverted.
The top left-hand part of the output window is the Input
Mixer. This part of the output tab allows the user to
route any input (A-D) to any output, from -48.00dB
(mute) to +12.00dB, with the gain fader in the mixing
matrix.