Void Digidrive V2, Руководство пользователя

Страница: 21 / 36

Digidrive V2
User Manual
21
7.6.1…………………….……………………………………..Main
x
A mixing window for all inputs/outputs, so a user can use
the faders to adjust the level of the inputs/outputs
relative to one another from -48.00dB (mute) to +12dB.
There are Mute buttons below each fader which cut the
corresponding channel (red when active), as well as
Link buttons, which join two channels (A/B, C/D, 1/2, 3/4,
5/6) together to form a stereo pair. Users have store/
loading options both for the device and the PC on the
software, under Local Presets users can store/load a
program from/to their computer, and under Unit Presets
users can store/loaded from the device.
NOTE: To store a preset from the computer onto the device, it must
first be loaded into Live Link and then the Store button pressed
under Unit Presets. It would be advisable for the user to check on
the device that the preset has loaded before disconnecting.
7.6.2…….…………………………………………………..X-Over
x
This tab shows the crossovers for each of the 6 outputs.
The right-hand side of the window includes metering for
each output, -48dB to +12dB, as well as Link buttons for
stereo linking outputs 1/2, 3/4, 5/6. The Mute buttons
below will cut the corresponding channel. The Phase
Invert buttons determine the polarity of the output,
either Normal (+) or Inverted (-).
x
The HPF/LPF for each channel is at the bottom of the
window. Users can enter the value for the frequency in
the number box or click the corresponding triangles in
the frequency graph to manipulate it. This applies for
both HP and LP. The drop down menus for the HP/LP
allows the user to choose the filter type: Bessel,
Butterworth or Linkwitz-Riley from 6dB/Octave curve to
24dB/Octave.
x Below the HPF/LPF, there is a gain and delay control on
each channel. The gain from -48.00(mute) to +12.00dB
for level adjustment, and delay from 0 to 20ms.