RD-80e
DATA FILER
3.2 THE REAR PANEL
1. [AC ADAPTER] connector: connect the connector leading from the adapter supplied
to this socket.
2. [POWER] switch: instrument on/off switch.
3. [JOY PORT] connector: this connector can be used to connect the optional
peripherals such as the video interface, the vocal harmoniser and the additional graphic
display to the RD-80e.
This connector can also be used to equip the instrument with a MIDI IN port using a
Joy Port-to-MIDI cable.
Consult the connections section for further details about this.
4. [MIDI OUT] connector: output port for the MIDI data generated by the RD-80e.
5. [FOOT SW] (foot-switch) connector: allows connection of a foot-switch pedal with
start / stop function.
To avoid damage to the internal components of the RD-80e it is important to use only
pedals with normally open contact
.
6. AUDIO OUT section: the section contains all the signal outputs generated by the
internal sound card of the RD-80e.
•
[PHONES]: socket for connection of a pair of stereophonic headphones. It is
important to use headphones with impedance of at least 100
Ω
.
•
[R] and [L/MONO]: connect the cables leading from your amplification system to
these sockets. If a monophonic signal is used, use only the [L/MONO] socket.
58