Installation
Instructions
Disposer
BEFORE YOU BEGIN
Read these ins tructions completely and carefully
'
IMPORTANT -
IMPORTANT -
Save these instructions for
local inspector s use.
Observe all go verning codes
and ordinances .
Be sure to leave these
instructions wi th the Consumer.
Note to Installer -
Note to Consumer -
Keep these instructions for
future reference.
Installation of this appliance requires
basic mechanical skills.
1 hour
Proper installation is the responsibility of the installer.
.
Skill Level -
Completion Time -
Phillips and flat blade screwdrivers
Channel lock pliers slip joint
,
Hammer
Nut driver
PREPARATION
.
1 Disconnect electrical power supply to disposer.
2. Remove old disposer or sink flange assembly.
3. Inspect drain line. If it is heavily coated with hardened
grease and accumulations, rout out with a plumber s
snake.
4. Remover old sealing materials and gasketing from
sink opening, both to p and bottom.
NOTE: Top and bottom of sink surfaces must be free of
any materials to prevent leaks.
'
ADDITIONAL MATERIALS YOU MAY
NEED
1. Steel punch or wooden dowe l
2. Petroleum jelly or liquid soap
3. Hose clamp
4. Dishwasher drain connector
5. Adjustable pipe wrench
6.
putty (for cast sinks)
7. Stepped rubber drain adapte r
8. Wire nuts
9. Cable connector
10. Flexible drain pipe
11. Power cord kit
Plum ber s
'
-4-
WH AT YO U WILL NEED
