[Type here]
15 16
● Cleaning a
ir filter and
wet curtain assembly
If too many foreign matters are attached to the air filter, it will affect the wind effect, and therefore
it should be cleaned at least once every month.
1. Unplug the power cord,
2. First, take out the air filter and then remove the wet curtain bracket assembly (operate as
below).
3. Clean the air filter with detergent and a soft brush.
4. Soak the wet curtain assembly in the cleaner for a few minutes, then wash and dry.
● Tank cleaning
1. Unplug the power cord, turn the knob of the water tank lock to the horizontal direction, and
take out the water tank.
2. Dampen the towel with detergent slightly and wipe the scale in the tank, then wash with
clean water and pour out the sewage.
● Machine surface cle
aning
1. The device surface can be cleaned with damp cloth; do not rinse with water directly.
2. Do not use corrosive detergent or solvent for cleaning.
3. Turn off the Power and unplug the power cord before cleaning, or else it may cause electric
shock.
●
Install and use after cleaning
1. Install the air filter, wet curtain assembly and water tank in sequence, and ensure that the
installation is correct.
2. Connect the Power and make sure that the product is working properly.
● Maintenance
1. If the product won't be used for long, unplug the power cord, pack the device and prevent
dust from entering.
2. Before packaging, the wet curtain and filter should be dry, and there is no water in the tank.
VI. Technical Parameters
Model
DF-AF2908C
Rated Voltage
220-240 V~
Rated Frequency
50Hz
Rated Power
110W
Noise (high level)
dB
≤66
Dimensions
L/403.0mm×W/345mm×H/930.0mm
Unit Weight
8.0Kg
Package Weight
10.5Kg
VII. Environmental Protection
Do not use chemical agents for cleaning.
Turn off the power and unplug the power cord.
Always unplug the power cord before cleaning the device, or
else it may cause electric shock.
If dust is accumulated on the surface, please wipe with soft cloth: if the surface is
dirty, mix water lower than 50°C and neutral detergent, wipe with soft cloth and
dry.
Do not use gasoline, thinner and any substance that damages the surface easily
for cleaning.
