4
and then cover flame e.g. with a lid
or a fire blanket.
W
ARNING: Danger of fire: do not
store items on the cooking surfaces.
M
eans for disconnection must be
incorporated in the fixed wiring in
accordance with the wiring rules.
D
o not allow electrical fittings or
cables to come into contact with
areas on the appliance that get hot.
D
o not use the appliance to heat
the room it is located in or to dry
clothing.
D
o not install the appliance next to
curtains or soft furnishings.
I
f the supply cord is damaged, it
must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard.
T
he appliance is not intended to be
operated by means of an external
timer or separate remote-control
system.
P
ower cord can
’
t accessible after
installation.
T
his product can be worked but not
through outside timer and remote
control.
W
arning: If the surface is cracked,
switch off the appliance to avoid the
possibility of electric shock, for hob
surfaces of glass ceramic or similar
material which protect live parts.
W
arning: a steam cleaner is not be
used.
C
AUTION: The cooking process
has to be supervised. A short term
cooking process has to be
supervised continuously.
W
ARNING: Unattended cooking
on a hob with fat or oil can be
dangerous and may result in a fire.
T
his appliance should be
connected to a circuit which
incorporates an isolating switch
which can accessible by the user
after installation providing full
disconnection from the power
supply. The disconnection may be
achieved by incorporating a switch
in the fixed wiring in accordance
with the wiring rules.
W
arning: Before obtaining access
to terminals, all supply circuits must
be disconnected.
W
ARNING: Use only hob guards
designed by the manufacturer of
the cooking appliance or indicated
by the manufacturer of the
appliance in the instructions for use
as suitable or hob guards
incorporated in the appliance. The
use of inappropriate guards can
cause accidents.
W
ARNING: The appliance and its
accessible parts become hot during
use.
C
are should be taken to avoid
touching heating elements.
R
egarding the instructions for how
to Installation,thanks to refer to the
section “Installation”.
Installation
Electrical connection
Before connecting the appliance, make sure that the supply voltage
marked on the Rating Plate corresponds with your mains supply voltage.
