14
When the safety lock has been switched on, it will disable any of the other buttons
on the control panel, apart from the ON/OFF button.
Note: To avoid misoperation,if activate the safety lock by pressing the safety lock
button,and the safety lock is not cancelled
before the controller is switched off,
the
safety lock function will continue to be effective when the controller is switched on
again.
It will disable any of the other buttons except ON/OFF button if not
cancelling the safety lock.
9. Timer adjustment
Your hob has a timer which will countdown a period of time between 1 and 99 minutes.
If timer display shows 0 for the initial status,press minus button,countdown period will
be 30 to 0.At the end of the countdown period an audible signal will sound for 2
minutes, press any key within 2 minutes can close the audible signal.
Press the timer button,use the plus button and minus button to set the countdown
time,first pressing “+” button,timer will begin from 1.
If you want to cancel the timer,you can adjust the countdown time to 0.
The timer display will show the countdown time that is being set.
The timer display will increase in 1 minute intervals each time the timer plus button
is pressed,and a short audible signal will be heard.
The timer display will decrease in 1 minute intervals each time the timer minus
button is pressed,and a short audible signal will be heard.
If the set time exceeds 99 minutes, the timer display will return to showing 0.
Note: 1. For timer adjustment,touch timer button and use plus button or minus
button to input new time.
2. After selecting the burner,you can set the timer before setting the power
level of the burner,within 10S(decimal point of corresponding digital tube will
flash,1 time/S) no operation after timer adjustment,timer will automatically return
to 0(display show 00),and decimal point will extinguish.
3. After the burner is working,durning timer setting and completed, indicator
of corresponding burner will flash(1 time/S),and it will keep flashing until end of
the timer.
9.1 Partition timing
The hob timer can be used as a minute minder for any of the cooking zones without
affecting the cooking process or power setting of each burner,and each value can be
different.
Single cooking zone timing
When setting a countdown time for a cooking zone,press timer button first,the
indicator light of the selected cooking zone will flash display, the decimal point of
digital tube will display,and to indicate the set timer has been related with the
selected cooking zone.At this time,you can use the plus button and minus button
to set the countdown time.
Several cooking zones timing
Each timer setting operation will be same as “Single cooking zone timing”.As long
as setting a countdown time for the burner,the corresponding indicator light of that
burner will flash.
