15
Press any of the cooking zone select button,the digital tube will show the timer
value of that burner.
When not selecting any burner,the digital tube will show the minimum timer value
of all burners,
that is associated with the cooking zone of the cookingzone
indicator lamp.
9.2 Default timing
All of the 4 cooking zones have default timing function,if not setting the timer
manually, the relationship of default timing and power level refers to table below:
Power Level
1
2
3
4
5
6-9
Default timing
6h
6h
5h
5h
4h
1.5h
When all the default timing is reached, the cooking zones will switch off
automatically and enter into standby mode.
10. High temperature warning
Manual long press “on/off” button for 3s till power off, the whole appliance will stop
heating, but the cooking surface still has high temperature, the indicator of
corresponding cooking zone which stop heating will show residual heat warning
symbol “H”, to indicate corresponding cooking surface high temperature.
As long as the burner has heated before, the indicator of the corresponding burner
will continued display “H” for 20 minutes after switched off.
11. Protection function
High temperature protection: When the temperature of the hob plate is too high,
the mechanical temperature limiting protection device of its own will start up, then
the hob will stop heating, it will return to heat after the temperature falls.
Residual heat protection: When the whole appliance stops heating, the digital tube
of the relative heating zone will display residual heat warning symbol “H”, cooking
surface temperature is too high, please do not touch to avoid getting burned.
Safety cut-off protection:For the models with plug,when cut off after 1S at any
time,the voltage between L/N of the plug should fall to below safe voltage range.
Connection of display board and power supply board breakdown: When the
appliance is switched on,
if the display board does not receive the correct power
board signal for 20 consecutive seconds, the timer 2 digit digital tube will display
"E1" and all loads stop working.It will return to power off mode after 1 minute,and
display will continuously show residual heat warning symbol “H” for the one which
under residual heat protection.
How to use the hot plate
Put the pot in center of the heating zone, Turn the knob clockwise and anticlockwise to
turn on the hob.
High temperature indication lamp:
When the glass plate is too hot, the high temperature indication lamp will light up, don’t
touch the glass plate until the indication lamp goes out.
Shut down:after using,please turn the knob to “OFF”,the hob will stop heating.
