12
during the self-inspection, please refer to protection function for problem analysis, you can
touch “ ” to cancel the fault code and return to standby mode.
2. Time setting
In the standby mode, touching the “ ” button once to enter the system clock setting state.
At this time, the hour value of the clock and the setting icon “ ” flash (1s/1 time) and the
hour is set by rotating the switch KB2. (0~23~0 is recyclable)
Pic 4: Hour and minute adjustment display effect
•
After adjusting the hours, re-touch “ ” to switch to minute adjustment. Minute value and
the setting icon “ ” flash at this time, you can set minute time by rotating programming
switch KB2.(0~59~0 recyclable)
•
After adjusting the minutes, re-touch the “ ” to confirm, clock setting accomplished.
And at this time, the clock setting icon “ ” goes out and the second icon “
：
”flashes
(1s/1 time).
•
When the hour and minute are set, the system clock setting icon “ ” flashes and the
system clock icon “ ” is always on. After confirming, the setting icon “ ” is off and the
system clock icon “ ” continues to be displayed. In the hour setting, if you do not touch
the “ ” button to confirm within 10 seconds, it will automatically switch to the minute
setting. If the “ ” button is not confirmed within 10 seconds after the clock setting is
completed, the system defaults to complete the clock setting and automatically returns
to the standby state. If the clock is not set within 20 seconds after power-on, the system
default clock is 12:00 and enters standby state. If the power is turned off, the clock will
be reset.
•
In the standby state, only the system clock is displayed.
3. The choices of function
•
Under standby status, switch different functions by rotating the programming switch
KB1 in turn, refer to picture 5 for the order.
(Non-recyclable, oven function will
remember the last operation)
Pic 5: Oven function mode
•
When selecting the function, the clock position shows the default cooking time of the
corresponding function (it will show “Eco” under Eco mode), the temperature position
shows the default temperature of the corresponding function. For temperature
adjustable function mode, temperature place will display default temperature value of
corresponding function and flash, temperature icon “
℃
” will flash, and the working
parameter setting icon “ ” flash as well as the oven working icon “
” is always on.