red-y smart series
Manual
Version
Page
PCU-10
PCU-10_E2_1
© Vögtlin Instruments AG
03
1.1 Important Instructions
Before and installing and operating the instrument it is strongly recommended that this operation
manual should be read carefully. Not following the guidelines could result in personal injury and
damage of equipment.
The content of this manual is provided for information only and may be altered without prior notice.
Voegtlin Instruments AG assumes no responsibility or liability for any errors or inaccuracies in this
manual.
This symbol alerts the user to important operating, maintenance and service infor-
mation.
Installation
Prior to commissioning please note the following
Only the supply voltage indicated on the nameplate is permissible
This device must be grounded.
The power supply is 100…240 VAC / at a maximum of 1.3A
If a PDM-U cable is being used, do not connect an additional 24 volt power supply.
Products mentioned in these instructions can contain metal or elastomer gaskets, O rings or valve
intakes. It is the user’s own responsibility to select only such materials that are compatible with the
process and the process conditions. The use of non-compatible materials can cause leaks in the
gaskets of devices which could permit gases to escape from the device
– which in turn can lead to
health hazards and death.
We recommend checking the smart devices at regular intervals to ensure that leakage has not
occurred. The metal or elastomer gaskets, O rings and valve intakes change with age and thus
release gases due to leakiness.
Important instructions
Do not remove the cover - it prevents damage to the system. In case of a damaged holo-
gram seal the warranty expires.
There are no serviceable parts under the cover
Repairs must only be performed by qualified personnel