PFW 6852
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
1) Place the Mount against the wall and align it with the pilot hole.
2) Insert one (1) 5/16" x 3˝ hex lag and one (1) 5/16" washer into the
upper right pilot hole.
3) Use a socket wrench and a 1/2" socket to tighten the hex lag.
Do not overtighten the hex lags.
1) Level the wall plate.
2) Use a pencil to mark the remaining five (5) mounting locations
along the center of each wall stud.
Two people are recommended for this step; one person to level
the wall plate and another person to drill the pilot holes.
Drill a “pilot hole” in the center of each of the marks with a
power drill and a 1/4" drill bit.
Only use 1/4" drill bit when drilling the pilot holes.
1) Insert one (1) 5/16" x 3" Hex Lag and one (1) 5/16" washer into each pilot
hole
2) Tighten all hex lags using a socket wrench and 1/2" socket.
Do not overtighten the hex lags when attaching the mount to the wall.
Improper installation may result in personal injury or property damage.
PFW 6852
www.vogels.com | Europe +31 (0)40 26 47 400
Page 5
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
4
5
6
7
www.vogels.com | Europe +31 (0)40 26 47 400
Page 5
