PFW 6852
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW 6852
www.vogels.com | Europe +31 (0)40 26 47 400
Page 3
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
Mount Orientation
Nose Piece Orientation
Left-Hand Swingout Orientation
Right-Hand Swingout Orientation
Tension Bolt Nuts
and Washers
Tension Bolt Nuts
and Washers
Tension Bolts
Tension Bolts
Nose Piece
Nose Piece
The Nose Piece consists of four parts that must stay together in the order that they were manufactured. If they become separated during
any of the Nose Piece Orientation steps, re-assemble the parts in the order shown below.
Outer Radial Bearing
Outer Radial Dish
Inner Radial Dish
Inner Radial Bearing
Proceed to the
“Wood Stud Installation”
section if installing on a wood stud surface. The drywall must be at least 1/2” thick.
Proceed to the
“Concrete Installation”
section if installing onto a concrete surface.
Left-Hand Swingout Arm Orientation
Right-Hand Swingout Arm Orientation
Nose Piece
Upright Orientation
Swingout Arm can be oriented to open from either the left-hand or right-hand side. Simply invert and re-orient the Nose Piece.
Proceed to the
“Nose Piece Orientation”
section.
1) Remove the Nose Piece by removing the tension bolts, tension bolt nuts, and washers.
2) Detach the Nose Piece assembly, rotate it 180°, And place it back onto your Swing out Arm.
3) Slide the tension bolts back into the holes and attach the tension bolts nuts and washers from the backside of the Nose Piece Assembly.
4) Tighten the tension bolts.
Do not overtighten the tension bolts.
www.vogels.com | Europe +31 (0)40 26 47 400
Page 3
