PFW 6852
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
Insert and tighten two (2) M6 x 30mm locking screws into the
bottom of the Nose Piece.
Caution!
Do not overtighten the M6 x 30mm locking screws.
Caution !
Warning !
Warning !
The following procedure requires two people.
The M6 x 12mm screw and lock washer must be installed otherwise
the flat panel can be easily dislodged, causing serve personal injury
and/or properly damage. Use extreme care when pushing or pulling
on the Swing out Arm.
Do not release the flat panel / mounting bracket assembly unless the
hood of the Universal Bracket Bar is firmly seated on the Nose Piece.
1) Lift the flat panel / Universal Bracket assembly to the Swingout Arm.
2) Slide the hood of the Universal Bracket Bar over the top of the Nose Piece.
3) Slowly lower the flat panel / mounting bracket assembly on to the Nose Piece.
4) Insert and tighten M6 x 12mm screw and lock washer to secure the
flat panel / mounting bracket assembly to the Swingout Arm.
Flat Panel Removed for Clarity
Attaching the Flat Panel to the Swingout Arm
PFW 6852
www.vogels.com | Europe +31 (0)40 26 47 400
Page 12
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
22
23
www.vogels.com | Europe +31 (0)40 26 47 400
Page 12