PFW 6858
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
5
3
6
4
1.
Place the wall mount against the wall and align it
with the pilot hole.
2.
Insert one (1) 5/16" x 3" lag bolt and one (1) 5/16"
washer into the upper right mounting hole and
tighten using a socket wrench and 1/2" socket.
1) Level the wall mount.
2) Use a pencil to mark the remaining three (3)
mounting locations along the center of each wall stud.
Drill a "pole hole" in the center of the upper right mark
using a 1/4" drill bit and power drill.
1.
Place the wall mount against the wall in the
desired viewing location.
2.
Use a pencil to mark the upper right mounting
location alone the center of the wall stud.
Do not over tighten the lag bolt.
www.vogels.com | Europe +31 (0)40 26 47 400
Page 4
PFW 6858
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
5
3
6
4
1.
Place the wall mount against the wall and align it
with the pilot hole.
2.
Insert one (1) 5/16" x 3" lag bolt and one (1) 5/16"
washer into the upper right mounting hole and
tighten using a socket wrench and 1/2" socket.
1) Level the wall mount.
2) Use a pencil to mark the remaining three (3)
mounting locations along the center of each wall stud.
Drill a "pole hole" in the center of the upper right mark
using a 1/4" drill bit and power drill.
1.
Place the wall mount against the wall in the
desired viewing location.
2.
Use a pencil to mark the upper right mounting
location alone the center of the wall stud.
Do not over tighten the lag bolt.
www.vogels.com | Europe +31 (0)40 26 47 400
Page 4
PFW 6858
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
7
1
1.
Insert one (1) 5/16" x 3" lag bolt and one (1) 5/16"
washer into each pilot holes.
2.
Tighten all lag bolts using a socket wrench and
1/2" socket.
Two people are recommended for this step: one
person to level the wall mount and another person to
mark the mounting locations.
Concrete Installation
2
3
Drill four (4) pilot holes of each mark using a drill and
3/8" masonry drill bit.
Insert the Finned Anchors into each pilot hole.
Lightly tap each Finned Anchors into place with a
hammer.
Do not over tighten the lag bolt.
www.vogels.com | Europe +31 (0)40 26 47 400
Page 5
