www.vogels.com
1
2
4
10A
11
9
10B
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW 6850
Once the correct pitch and depth screws are pulled from
the hardware pack supplied, secure the two brackets to the
rear of the display with the proper screws and plate washer
holes. Plastic spacers are also supplied in case you need
additional clearance between the bracket and the rear of the
display. NOTE: Do not over tighten the screws.
With the upper and lower security screws loosened on each
bracket (two people recommended) raise the display and
place the top hook of the bracket over the receiver plate on
the wall mount. Allow the lower end of the bracket to lay flat
against the mating plate on the mount.
Center the display horizontally on the plate and check the
display is level on the mount. To adjust level, adjust the left
or right top screw to achieve desired level of the display.
Once level, secure the lower left and right security screws
on the bracket to “fix” the mount to the wall mount.
x4
x4
x4
x4
Place the display face down on a smooth flat surface. Place
the left and right mounting brackets over the four mounting
points on the rear of the display arrow pointing up to the top
of the display, making sure the brackets are lined up with the
center top to bottom on the display.
