enGLish
Four Button infrared remote – instructions for use
projector Lift Version
operation
When power is applied to the control box the IR Remote will boot up. The green LED
will blink 20 times. The Red LED provides projector
lift codes. Consult the Projector Lift
Manual for LED lift codes.
The IR remote will default to automatic mode (Up, Down, Stop). Basic functions (UP,
DOWN, STOP) activate by pressing the button
for 1 second.
note:
For accurate programming of lift show and service positions we recommend
using the hardwired remote provided with the lift.
The electronic Lower Limit cannot be reset with the IR Remote.
up
stop
doWn
hidden
Basic control
Function
Button
Go to Home position (all the way up)
UP ARROW
Go to Show position (1st programmed position)
DOWN ARROW
Stop Movement
STOP Button (Red)
Go to Service Position (2nd programmed position)
Hold HIDDEN for one second, release,
then press and release DOWN
Enter Manual Mode
Press HIDDEN for 5 seconds, release,
then press STOP for 5 seconds
(Green LED will blink slowly)
1
