Installation Instructions
ulo |
507
© 2018 Vode Lighting LLC. All rights reserved. | 21684 8th Street East, Suite 700, Sonoma, CA 95476 | 707.996.9898
ulo | 507 | Installation Guide | August 2019 | Rev A •
7
Shelf Mount (
SM
)
Determine desired location of ulo. Drill 3/32" pilot holes into
surface. Use the provided #6 screws to mount the bracket to
desired surface. If using the shim, place between the mounting
surface and bracket and using 2” screws, as shown. If not
using shim, mount bracket directly to surface using 5/8” screws,
as shown.
Gently place the light bar onto the mounting arm with dome
magnet face down. Caution: Risk of pinching. Ensure fingers
are clear of magnets. Plug the light bar cord into your selected
power supply.
Remove protective film from lens and use the
proximity sensors to control the system.
The front sensor
controls the light level and the back sensor controls the color
temperature (CCT).
- OR -
With Shim
Without Shim
Light
Level
CCT
Light
Level
CCT
