SETTING THE WIRELESS CHANNEL
Once the physical connections to the transmitters and
receiver are made, the next step is establishing a wireless
connection .
SELECTING A CLEAR CHANNEL ON THE BODYPACK
RECEIVER (BR)
1 . Power ONLY the BR on; leave the Stationary and
Bodypack Transmitters powered off.
2 . Change the channel by twisting the Channel Select knob
3 . Observe the Status Indicator as the channel changes
• If the LED stays on, the channel is not clear.
• If the LED blinks, the channel is not clear.
• If the LED stays off, the channel is clear and is good to
use .
After a channel has been discovered, tune either the
Stationary Transmitter (ST) or the Bodypack Transmitter
(BT) to the same channel. Refer to Descriptions & Details for
more information .
RF
POWER
ON
OFF
ANT.
14
