GETTING CONNECTED
CONNECTING THE STATIONARY
TRANSMITTER (ST)
1 . Plug the included power adapter into the ST.
2 . Insert the music signal:
• With the Input Select set to LINE IN, plug in the
LEFT & RIGHT channels from the music source
output (i.e. mixer, player, etc.) into the LEFT/RIGHT
XLR-1/4” Combo Input Jacks on the back of the ST.
OR
• Plug an 1/8” stereo cable from the music source
(i.e. laptop, smartphone, MP3 player, etc.) into the
1/8” LINE IN jack on the back of the ST.
3 . Insert the Microphone Signal:
• Plug in the microphone into the MIC IN available on
the back of the ST.
OR
• With the Input Select set to MIC IN, plug in up to
two (2) microphones into LEFT/RIGHT XLR-1/4”
Combo Jacks on the back of the ST; one in each
jack.
• Plug in a third microphone into the MIC IN jack on
the far right side in the back of the ST.
Note: When the Input Select is set to MIC IN,
microphones plugged into the LEFT/RIGHT XLR-1/4”
Combo Jacks will be considered LINE inputs on the
front MIC/LINE Mixer knob. See Descriptions &
Details for more information.
Note: The 1/8” LINE IN jack enables the Silent PA
to accommodate up to three (3) microphones, plus
music. MIC/LINE Mixer knob must be in middle
position to hear all three mic signals simultaneously.
MIC IN
LINE IN
DC 12-15V IN
PUSH
PUSH
1
10
