G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
19
➢
The adjustment range of 1800 pixels is calculated according to the signal source resolution. If the
signal source is 1080p and the adjustment value is 450 pixels, when switching to 4k/2k input
signal, the adjustment value will be converted to 900 pixels automatically to maintain the same
image position.
13. PC tool
➢
Each G406s has independent IP address. The default IP address is 192.168.0.100. User can set
different IP address in each G406s and control multiple units of G406s at the same time.
➢
Two PC tool is available for the control of GeoBox:
✓
WebGui: embedded inside G406s. No additional software is required.
✓
UHDWall Manager (UWM): HID PC tool, can be used through USB or Ethernet connection
without installation process.
13.1. WebGui
➢
WebGui is embedded inside G406s. Once user connects G406s with PC through Ethernet, user can
access WebGui and execute all operation similar to OSD menu through Virtual Keys and OSD Menu.
No PC or appropriate software tool is required.
➢
User can turn on/off the system through WebGui and see the status through power indicator.
➢
WebGui can be controller through mobile phone. Please note that iPhone may have different behavior
and cause some mistake.
➢
In WebGui operation, the icon in the slide bar may need to move to middle point to take effect.
Channel selection
Power Indicator
Input selection
OSD
Menu
