G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
17
10.3.
Load/Save Profile Index through WebGui and UWM PC Tool
➢
Profile [Load] and [Save] button under [System] menu are available to Load and Save profile
settings.
➢
Load and Save will apply to all channels at the same time.
11. System Reset
User can rest system through below method:
➢
User small pin to insert RESET hole at back panel for 5 seconds, user will see [Reset to Default]
message. It will apply to all channels at the same time. It will also delete the data saved in Profile
Indexes.
➢
OSD menu to reset the system will only be functional for two channels at the same time.
➢
[Reset] hotkey on remote controller will access directly to RESET OSD menu directly.
➢
When operating through OSD or remote controller, user can select to reset [Reset All] or only reset
[Video Wall setting] setting.
➢
Reset through [Reset] hole on the back panel will clean [Profile Index] settings.
➢
Reset through [Reset] hotkey on the remote controller or OSD menu, [Profile Index] settings will
not be deleted.
12. Flexible Aspect Ratio Adjustment
User can use Video Wall [Overlap] function to change the aspect ratio of the image with black borders or
to stretch the image in specific direction to compensate the aspect ratio difference between video wall
and the content. The Maximum adjustment range is 1800 pixels in each edge.
Load
Index
Hotkey
Number
key
