G-602
18
[CTRL + Arrow]: Continuously execute uniformity adjustment to the target points or region.
Example to set different locations with the same uniformity adjustment value
Move [Arrow] to new position and set uniformity values
Click [Space bar] to implement and copy the value
Move [Arrow] to point A
Press [L] to recall the value, then press [Space Bar] to implement the value to point A
or [CTRL + Arrow] to implement to continuous points or region.
Move [Arrow] to point B
Press [L] to recall the value, then press [Space Bar] to implement the value to point B
or [CTRL + Arrow] to implement to continuous points or region.
Example to copy uniformity settings value A to B
Move [Arrow] to A
Press [Space Bar] in keyboard to copy the value
[Arrow] key to B
Press [L] to download the value to point B
Press [Space Bar] to implement A value to point B or press [CTRL + Arrow] to
implement A value to continuous points.
7
[EDID] setting
Selectable EDID setting and programmable EDID function are added into GeoBox.
a
、
GeoBox can support big range of input signal timing
—from 1024*720 up to 4k/2k. User needs to
select optimized input signal resolution to get the best video perfomrance.
b
、
Different PC or signal source devices may have different behavier and may need to do output
resolution settings manually.
c
、
Different display modes may show different final image aspect ratio. User may be able to use
different EDID setting to change signal timing and get different PC desktop aspect ratio.
Activate EDID setting menu:
[Options]
[Setting]
[EDID]
Use IR remote controller to select desired
EDID.
After select EDID, the PC or medial will
automatically change the output timing
setting.
Press [INFO] key to check if the input and
output timing are set correctly.
User can also create any EDID timing
through the menu [Custom]. The timing
range are as follows:
H: 1024-3840
V: 720-2400
