G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
39
13 Detailed procedures to create custom display mode
13.1
Introduction
1) User can create all kinds of display modes for regular, portrait and irregular video wall with
different size, resolution and bezel LCDs at any angle and position through input the coordinates
of two corners (Top left and Top Right) in each LCD.
2) 4 LCD as one display unit in each G413 and can be cascaded with multiple units without number
limitation. The display panel shall be at 16:9 aspect ratio. If non-16:9 aspect ratio LCD is used, it
can be customized by factory.
3) PIP/POP function is still available in the custom modes created by user.
13.2
Select Preset Mode from OSD
[Mode Type] is for the selection of pre-defined modes in G413.
13.3
Collect coordinates from design drawing
1) User can convert project design drawings into 1920x1080 coordinates and pick up the
coordinates at Top Left and Top Right corners in each LCD, then input to G413 through OSD or
1) Please select Mode # first, then select
Preset Mode type. It will store selected
preset mode into this Mode #.
2) Preset Mode doesn’t execute bezel
compensation. User needs to do bezel
compensation through remote controller
or Galign2 PC Tool.
