G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
10
6 Basic concept for video wall configuration
11)
[Top RH] & [Top LH] X/Y
coordinates determine the image position
-
Image allocation for each LCD is based on [Top RH] & [Top LH] corner X&Y coordinate value
in 1920*1080 coordinate system. The coordinate system must keep 16:9 aspect ratio.
-
Original point (0,0) is located at Top Left corner. (1920, 1080) is located at Bottom Right
corner.
-
No matter the LCD is located at any location, once it is 16:9 aspect ratio, user can assign the
image location to each LCD through [Top RH] & [Top LH] X&Y coordinates.
-
Through [Top RH] & [Top LH] coordinates change, user can adjust the image size, rotation
angle and position in each output.
-
User can setup creative video wall through design drawing and calculate the distance to
convert into X&Y coordinates or take photo of the video wall, then convert it into X&Y
coordinates through Window [Paint] software.
-
After collect [Top RH] & [Top LH] X&Y coordinates, user can upload X&Y values by remote
controller or Galign2 PC Tool. Galign2 PC tool is recommended for easier and quicker setup.
12)
[Shift]
function is to adjust X or Y values at [Top RH] & [Top LH] at the same time resulting image
shifting in H
＆
V direction without change image size. It applies to each output for position fine-tune.
13)
[Ratio] & [Position]
functions allow user to change complete video wall image aspect ratio and
image position.
