VMware NetApp FAS 2050HA, Руководство пользователя

Страница: 8 / 21

reboot of the storage controller at a future time. In the event the management/CIFS VIF needs to be
created after the initial setup of the FAS2050, please refer to the
Data ONTAP® Software Setup Guide for
irections in rerunning the setup process for the storage controller. d
1. For each NetApp controller, open NetApp FilerView® and click Network->Add Virtual Interfaces.
2. Name the new VIF.
3. Select the two network interfaces that will make-up the NFS VIF.
4. For Trunk Mode press the drop down arrow and select Multiple .
5. For Load Balancing press the drop down arrow and select IP .
6. Click Apply .
Figure 3) AS2050 NFS VIF setup –Create Virtual Interface. F
1. At the Manage Network Interfaces screen, click on Modify for the new VIF that was created in the
previous steps.
2. At the Modify Network Interfaces screen enter a private IP Address that will be used for ESX host
NFS connectivity and then enter the Netmask and click Apply .
3. At the Manage Network Interfaces screen click on Up for the new VIF in order to activate it.
7