VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
23
Good judgment must be used during installation. Prior to drilling
any holes in the vehicle, confirm the installation location of the
WHASP Tank and the bulkhead fittings. Confirm that the supplied
hoses will reach from the compressor to the bulkhead fittings, and
from the bulkhead fittings to the WHASP Tank. Also ensure that
there are no wires, hoses, or other components on the other side of
the panel that may be damaged when drilling holes.
For best fit, ensure the bulkhead fittings are centered on the top of
the structural ribs.
☐
From the chassis member, mark a location 5 in from the front of the vehicle
(Figure 23), and 4 in from the driver side (Figure 24).
Figure 23 — Measure from front of vehicle
Front of
vehicle
Driver
side
Figure 24 — Measure from driver side of vehicle
Front of
vehicle
Driver
side
