Vmac RAPTAIR-G30, Руководство по обслуживанию

Страница: 23 / 96

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
21
Mounting Locations
Top Mounting
This is the preferred mounting location. Placing the unit on top of the
service body provides the best access to ambient air, and provides the
best cooling. Maintain a minimum of 6 in between the sides of the Gas
Drive and all other solid objects (Figure 10).
Enclosed Mounting
Enclosed mounting is not recommended due to the
significant heat generated. As the engine used on the Gas
Drive is air cooled special attention must be taken to
ensure adequate air flow to the engine.
Mounting the Gas Drive in an enclosure will limit access to ambient air,
restrict the escape of hot air from around the unit and have an adverse
effect on cooling. Make sure that adequate ventilation is provided so the
cooling system will function properly. VMAC recommends mounting the
unit on a pull-out drawer.
Figure 10 - Mounting locations
It is not possible to make absolute recommendations regarding
ventilation because of the widely differing circumstances that are
possible. Duty cycle, ambient temperature and enclosure shape are
some of the important variables.
Ideal ventilation will provide good airflow through the unit with no
restrictions. Cool ambient air ducted to the gas engine air intake,
compressor air intake, compressor cooler and installing an exhaust fan
to remove hot air is recommended.
Ensure exhaust gas and hot air from the gas engine is
routed in a way to prevent recirculation back into the unit.
Enclosed Mounted
Top Mounted