VM Audio VAS12SUB, Инструкция по установке

Страница: 8 / 13

14 15
Subwoofer Configurations Tips
Speaker Wires
When running long lengths of speaker wires, it is
recommended that higher gauge wire (12 Ga or higher) is
always used. Using speaker wires lower than 12 Ga limits
the amplifier from delivering full power to the subwoofer(s),
which may result in poor sound performance.
Subwoofer Power Requirements
The following guidelines will assist you in selecting the
appropriate amplifier for your subwoofer(s) to maintain a
safe level of operation.
• For clear, high quality performances where distortion
should be at its minimum, the subwoofer(s) should be
powered with an amplifier capable of delivering twice its
power rating. (ex. Classical, Jazz, Instrumental, etc)
• For non-distorted high output performances where the
music is at a constant beat, the subwoofer(s) should be
powered with an amplifier with the same power rating.
• For musical performances where distorted material will
be allowed to be played back, an amplifier with half the
power rating is recommended for safe operation.
Equipment Protection
• Always optimize the signal levels throughout the system
to avoid overdriving your system and the subwoofer(s).
• When possible, use a low pass electronic crossover to
protect the main loudspeakers from low frequency notes
and protect the system.
• Keep in mind the electrical limitations of your system.
• Always avoid feedback.
Single Subwoofer Operation
Stereo Subwoofer Operation
CH 1 & CH 2
Bridged
CH 1 CH 2
Left Right