12
13
Making Your Own Connectors
Making Your Own Connectors
Speakon Connectors
1/4” TS Jack Connectors
1. Strip off 1/2 inch of insulation from the ends of each
speaker wire to expose the two conductors, and tightly
twist the wire strands.
2. Disassemble the 1/4” TS Jack connector by separating
the shield barrel from the tip sleeve and insert the
speaker wire through the shield barrel.
3. Solder the negative (-) wire to the sleeve and the
positive (+) wire to the tip.
4. Assemble the 1/4” TS Jack connector by attaching the
shield barrel back to the tip sleeve.
1. Strip off 1/2 inch of insulation from the ends of each
speaker wire to expose the two conductors, and tightly
twist the wire strands.
2. Disassemble the Speakon connector by separating the
bushing from the housing and insert the speaker wire
through the bushing and chuck.
3. Remove the insert from
the housing and connect
the negative (-) wire to
the 1- terminal as well
as the positive (+) wire to
the 1+ terminal.
4. Assemble the Speakon connector by attaching the
bushing back to the housing.
Содержание VAS12SUB
Страница 1: ...VAS12SUB VAS15SUB VAS18SUB SHAKER SUBWOOFER SYSTEMS...
Страница 13: ......