VM Audio VAS12SUB, Инструкция по установке

Страница: 6 / 13

10 11
Installation Installation
Option 2 (1/4” TS Jack Connection)
If using 1/4” TS jack speaker cable(s), plug the jack into
one of the 1/4” jack connectors.
Option 3 (Speakon Connection)
If using Speakon speaker cable(s), plug the Speakon into
one of the Speakon connectors and lock it into place by
turning the connector clockwise. Once locked, it cannot be
accidentally disconnected.
Option 1 (Binding Post Connection)
1- Strip off 1/2 inch of insulation from the ends of each
speaker wire to expose the two conductors, and tightly
twist the wire strands.
2 - Turn post terminals counter clockwise to expose wire
holes and insert the positive (+) and negative (-) wires
through their respective post and tighten the terminals.
WARNING!
To prevent electrical shock hazard, always switch off the
amplifier when making connections to the subwoofer.
Step 2 - Speaker Wire Connections