EN
TROUBLESHOOTING
PROBLEM
CAUSE
REMEDY
The machine raises dust.
Filter clogged.
6KDNH WKH ¿OWHU XVLQJ WKH ¿OWHU VKDNHU
and if necessary remove and carefully
FOHDQWKH¿OWHU
Filter damaged.
5HSODFHWKH¿OWHU
)LOWHULQFRUUHFWO\¿WWHG
)LWWKH¿OWHUFRUUHFWO\LQSRVLWLRQ
The machine leaves dirt on the ground.
The main brush has collected string or
wire.
Remove the string and wire picked up.
7KHÀDSVDUHGDPDJHG
5HSODFHWKHÀDSV
Debris bin full.
Empty the debris bin
The main brush does not rotate.
Belt broken.
Contact customer service
Fuse burned out.
Contact customer service
Cable disconnected.
Check
Reduction drive damaged.
Contact customer service
The side brushes do not rotate.
Cutout tripped.
Contact customer service
Microswitch faulty.
Contact customer service
Cable disconnected.
Check
The suction motor does not work.
Blown fuse.
Contact customer service
Cable disconnected.
Check
Motor damaged.
Contact customer service
7KH¿OWHUVKDNHUPRWRUGRHVQRWZRUN
Blown fuse.
Contact customer service
Cable disconnected.
Check
Motor damaged.
Contact customer service
The machine won’t start
Battery terminals disconnected
Check
Batteries discharged
Recharge.
Emergency stop button pressed
Reset.
No fuel
Top up
No engine oil
Top up
Driver detection device faulty
Contact customer service
Operator not correctly seated.
Sit correctly in the seat.
Main fuse blown
Contact customer service
The batteries do not hold their charge.
No liquid
Top up.
Loose terminal
Tighten.
27