VLTG LX-300, Руководство пользователя

Страница: 5 / 22

灯具使用说明书
第
3
页
Chapter 2 Panel Operation
1. Overview
The schematic diagram of the luminaire panel is shown in Figure 3. The title above
shows the name of the luminaire, and the status bar below shows the signal of the current
luminaire, the status of the lamp, and the fault (When there is no fault information, "ERR" is
displayed, otherwise "NOR" is displayed).
This fixture supports DMX / RDM protocol. When the fixture is searched by the RDM
host, the three letters “RDM” will appear on the panel, indicating that the fixtures are
enumerated normally.
The display and operation are similar to "Android operating system", and you can
operate by clicking the corresponding item with your fingertip or a blunt object.
Note: Do not tap the display with sharp object to prevent damage.
Figure 3 Schematic diagram of display panel
2. Menu Operation
1. Select Menu Item

The area on the left is the TFT display area and the touch area. Use your finger or blunt
surface hardware to click on the contents of the panel, and you can complete
parameters setting or viewing status and other operations.

The right area is the auxiliary input. If you do not use the touch function that comes with
TFT, you can use the auxiliary input to select the items you want to set or view and
complete the operation.
2. Parameter Value Input
When the selected parameter item needs to enter a value, the window shown in Figure 4 will
open: