VLTG LX-300, Руководство пользователя

Страница: 3 / 22

灯具使用说明书
第
1
页
Chapter 1 Precautions and Installation
1.
Maintenance

This lamp should be kept dry to avoid working in a humid environment.

Intermittent use will effectively extend the life of the lamp.

In order to obtain good ventilation and lighting effects, pay attention to cleaning the fan
and fan net and the lens frequently.

Do not wipe the lamp body with organic solvents such as alcohol to avoid damage.
2. Statement
Its performance is intact and its packaging is complete before this product is shipped
from the factory. All users should strictly observe the warnings and operating instructions
stated above. Any damage caused by misuse is not covered by our warranty. Distributors are
not responsible for failures and problems caused by ignoring the operation manual.
This manual is subject to technical changes without notice.
3. Product Precautions

To ensure the life of the product, do not place the product in a humid or
leaky place, and do not work in an environment where the temperature
exceeds 60 degrees.

Do not place this product where it is liable to become loose or vibration.

To avoid the danger of electric shock, it need professional people to repair this product.

When the lamp is used, the power supply voltage should not change more than ± 10%.
If the voltage is too high, the life of the lamp will be shortened. If the voltage is too low,
the light color of the lamp will be affected.

After the power is cut off, it takes 20 minutes for the lamp to cool down sufficiently
before it can be used again.

To ensure the normal use of this product, please read this instruction carefully.

The DMX connection uses an RS-485 cable with shielded, 120ohm characteristic
impedance, 22-24 AWG and low capacitive reactance. The terminals must be connected
using 3 or 5 pin XLR male / female connectors. (Minimum 1/4 W).
Important notice: The wires must not touch each other or the metal case.